This lamp is selected on reasons of deriving of output power up to 1000W at small overall dimensions. The lamp is included under the schema with earthed grids, its(her) high steepness therefore will not be utillized. It is connected that the booster was engineered under the transceiver with a transistor output stage by power 100...120W. In sample alternative of actuation with the communal cathode the condition AB will be utillized, the output power compounds 600W. This condition can be recommended, if the output power of the transceiver compounds 25...30W. The coefficient of performance of such booster is low-level (standing current - up to 300mA), that is connected to supply of a linear condition of beefing-up. Lacks of this alternative, apart from a low coefficient of performance - necessity hardly to stabilize stresses screen and controlling of grids. If the transceiver with output power not less than 70 will be utillized... 80W, it is expedient to include a lamp under the schema with communal grids. In such schema the distortings, introduced by a stage, depend on a choice of an operating point on the performance of a lamp a little.
Уважаемые!
не оставляйте важные сообщения и ответы на них в новой версии форума -- http://ut2fw.com/forum, здесь пока полигон для экспериментов и тестирования
-----------------------------------------------------------
по прежнему для Вас работает форум: http://forum.ut2fw.ru/
тест test пышым-пышым-пышым...
Возможно, что для ещё паяющей публики, заглянувшей сюда, будет полезен мой опыт.
Речь о ферритах отечественного (советского) производства.
Хотя этой темы касался в описании трансивера, но без конкретных цифирок там было.
В прошлом году прибарахлился приличными количествами различных ферритов - посему пришлось провести лабработу - мотать-мерять-мотать-мерять. Колечки в заводской упаковке, со всеми ГОСТами-ОСТами-приёмщиками-упаковщиками и ты-ды - т.е. что это из мусорки - сомнительно. На различные проницаемости - 2000, 1000, 300, 50, 30, диаметром от 12мм до 7мм.
Кольца с большой проницаемостью проверял в работе для биноклей ШПУ, с малой проницаемостью для резонансных цепей.
Результаты:
1.Колечки проницаемостью 2000НМ-39, 1000НМ работают в биноклях ШПУ практически одинаково. Понятное дело, "резонансные" ёмкости параллельно биноклю имеют различный номинал. В одном ШПУ с биноклями из колец 1000НМ так и не удалось победить бОльший завал АЧХ на 29МГц. Хотя по логике именно с меньшей проницаемостью колец на ВЧ должно было быть лучше, ан нет...
- « первая
- ‹ предыдущая
- …
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- …
- следующая ›
- последняя »